Is It Time For A Blown Double Glazing Repair?
Condensation is an indication of double glazing that has been blown. This is because the seal between the two panes of glass has broken causing inert gas to escape.
Repairing your double-glazed windows is an absolute must. Not only will it save money on your heating bill and cut down on outside noise it will also restore the insulating properties of the window.
Damaged Seals
The window seals in a double-glazed system create a barrier that is airtight and watertight. This keeps warmth in and cold out. The seals could be damaged and result in misty windows, drafts and energy loss. If you notice that your seals are beginning to show signs of wear, it's time for you to replace or repair them.
One of the first signs you'll notice is condensation that is forming between the panes of glass. This happens because the inert gas inside the sealed unit degrades allowing warm air from outside to enter your home. The inert gas cannot be repaired after this happens.
Another sign that is common is the appearance of black mould on your windows or window frames. This indicates that the seals are broken and moisture is getting into the frame. This can cause shrinking of the timber as well as peeling and warping of the paint. After the window has been replaced the moisture that was inside the frame can be eliminated. Then you can get back to the original energy efficiency.
If you decide to have your windows repaired or replaced you should also think about upgrading the double-glazing to A-rated energy efficient glass because this will further increase the efficiency of your heating system and lower your energy costs. You can determine the energy rating of your windows by contacting the company you bought them from or looking online.
double glazing repairs that is drafty could be a sign that the seals on your windows are damaged or have been blown. If the window is still able to keep the cold out it can be worth having the seals replaced as fast as you can, as this will enhance the overall performance of your windows.
A simple test that you can use to determine if your window seals are broken is to rub the edge of your window with ice for a few seconds. If the window fogs up and you aren't able to wipe it off, then the seals are likely to be damaged. It is crucial to act swiftly on this as it can reduce the insulation of your double glazing, which can result in greater energy costs.
Water Leaks
Double glazing is an excellent investment that can add warmth to your home, reducing noise and improving efficiency in energy use, all of which saves you money in the long run. However, it's not a surprise that many homeowners face issues with their windows from time to time. Condensation between panes is a common issue that could cause homeowners to replace their double glazing. This can cause your windows to look dirty, or worse, let water in the property.
Condensation between the panes of your window is caused by water vapour mixing with cold glass, forming moisture that isn't easily wiped off. This is a normal process that happens when the temperature drops in the evening or when the windows are exposed to wet weather such as heavy dew. The best way to combat this issue is to ensure that your home has adequate ventilation and using dehumidifiers in rooms that are prone to moisture build-up.
If you are unable to remove the moisture from your double-glazed window the likelihood is that the unit has blown. This is the only way water can be able to enter a sealed unit after the gas has evaporated. There are companies that claim they can repair existing misted double glazed units by drilling holes in the glass and injecting chemicals through them which will absorb the moisture from inside the unit. This can eliminate the condensation or fog in a short time however, it's an interim solution that needs to be repeated.
It's unrepairable when the sealed unit fails. Your double glazing will have to be replaced because it won't have the same thermal insulation properties it had when new. Make sure to contact the company that installed your double glazing to determine if it is still under warranty. In this instance they'll either reinstate the warranty or provide you with discounts on the cost of replacing the unit.
Many online stores offer an easy kit that can be used to repair misted double glazing. This involves drilling small holes into the glass, then spraying a specific resin in the gaps to stop moisture from leaking through. This is a much more affordable and durable solution, but it should be done by someone who has the required experience in this area.
Deterioration
If the seals of your double glazing aren't performing as they should, moisture may get into the space between the windows and cause them to fog. This can result in the windows becoming less effective as they are no longer able to keep the cold outside and the warm in.
In certain circumstances misting could also lead to the formation of water inside your double-glazing. This can cause damage to the frame and if not addressed, it could cause water leaks and even mould growth inside your home.
If your windows are covered by warranty, you should consider asking your installer for help with the cost of repair or replacement. If they're not covered by warranty, you'll have consult a professional repair the damage.
A professional can replace your damaged double-glazed windows to restore the thermal efficiency and removing any condensation. When you begin to notice that your windows are leaking, it is important to get the windows fixed. This will lower your energy costs and prevent moisture from entering your walls or the plaster which could cause serious damage.
A double-glazed repair that has been blown can not only improve the performance of the double glazing, but also ensure the safety of you and your family. Blown windows can often have large gaps between the glass which isn't ideal for children and animals to play with. A professional will be able to equalize the pressure of the unit by drilling two tiny holes. They will then apply silicone sealant to restore the seal of your windows.
It is important to determine if your double-glazed windows are covered by a warranty. If you can't find any contact details, you might be able to claim a portion of the installation cost back. It is worth checking if the windows you purchase come with a lifetime guarantee. Contact your provider as soon as you notice any problems with your double-glazed windows, either in person or via phone, and then follow up in writing if possible.
Poor Insulation
Double glazing is a great investment that will add warmth to your home and block outside noise. They also provide energy efficiency and insulation upgrade for any home. Like any home improvement there are always potential issues. One example is when your double glazed windows start to mist. Misted windows are unsightly and can smudge your clean aesthetics. They can also be an health hazard because of the buildup of moisture. Thankfully, this can be repaired by a professional blow-blown double glazing repair.
If your double glazing has developed a condensation buildup, it's likely that the gas space between the glass panes has sprung a leak. This means that the inert gas has evaporated and warm air has been able to enter your home. This is a serious problem that needs to be addressed, as the double glazing will not perform its intended function, and your home will become more cold as a result.
Misting on the outside of your windows is natural and occurs mostly during the night and in the early hours of the morning, when temperatures drop and dew forms. This is not a cause for concern, and is simply a result of the windows working just as they should.
The moisture on the inside of your double glazed windows is a different matter. This is usually caused by inadequate ventilation and low humidity within your home. Make use of extractor fans to lower humidity in the kitchen and bathroom. Also open your windows frequently to allow fresh air circulation.
Most of the time the blown double glazing repair will only require replacing the damaged pane. A professional tradesperson with experience will assess the condition of your frame, and ensure that proper measurements are made to ensure that when a brand new window arrives it can be cut to fit correctly. They will then remove the old window and replace it with the new one, ensuring that all seals are properly installed to prevent moisture from entering your home.